ADNATUR

Events

ADNATUR IN  EMPLOYMENT AND ENTREPRENEURSHIP FORUM.

UPV CAMPUS ALCOY, 5-6 APRIL 2017 

  ADNATUR IN THE ANNUAL CONFERENCE OF THE

EUROPEAN TECHNOLOGICAL PLATFORM FOR THE FUTURE OF TEXTILE-CLOTHING SECTOR.

 BRUSSELS, 30-31 MARCH 2017

ADNATUR IN FOCUS SMES AND ENTREPRENEURSHIP.

EUROPE OPPORTUNITIES

Alicante, 3 November 2016

ADNATUR FINAL CONFERENCE

Final Event Announcement 15 Septemebr 2016 

ENEA - EU Liason Office Rue de Namur, 72-74 - 1000 Bruxelles 

 and discussed during the final event. Moreover, the participation of specialist scientists and field operators will enhance the programme.

      

ADNATUR AT ECO-BIO 2016 CONFERENCE

LIFE ADNATUR WILL MEET  ECO-BIO 2016 CONFERENCE

6-9 March 2016 Rotterdam, The Netherlands

Next Monday, 7th of March 2016, ENEA will participate at ECO-BIO Conference in Rottherdam, focused on challanges in building a sustainable bio-based economy. The track of the session where ENEA will disseminate the ongoing ADNATUR project activities and results, is "Industrial Biotechnology - Wastewater Treatment and Recycle/Reuse of Biomass.The conference will be held at the Postillion Convention Centre WTC Rotterdam, located on the Coolsingel and Beursplein in the center of Rotterdam, The Netherlands. 

LIFE ADNATUR AT ECOMONDO THE GREEN TECHNOLOGIES EXPO

RIMINI (ITALY) 3rd-6th NOVEMBER 2015

• The ideal place to meet Green and Circular Economy operators, strike new business deals, generate value and acquire new customers.
• The largest showcase in the Euro-Mediterranean area for advanced and sustainable technology for processing and recycling all kinds of waste; treating and reclaiming water, waste water and polluted marine sites; efficient use and transformation of raw and processed materials and the promotion of renewable raw materials.
• The place where businesses can meet competitors in complementary markets and leading players in public research in Europe and the Mediterranean area to establish national and international partnerships in the implementation of a knowledge-based Green and Circular Economy.
• The right place to find out exactly how to access national and European funds

LIFE ADNATUR LAST MEETING AND VISIT TO PROTOTYPES. 

Last 13th and 14th of May 2015, it was hold the 4th meeting of the project and the 2nd visit of the Monitoring Team, all progresses were presented. Moreover a visit to the two prototypes developed was done, first in EGEVASA's facilities and secondly n Textils Mora's facilities, both located in Ontinyent. 

ISPO MUNICH - 5TH-8TH OF FEBRUARY 2015

From 5th to 8th AITEX disseminated the project though its stand in the ISPO MUNICH. In this fair, there were more than 80.000 visitors and 2.585 exhibitors. 

WORKSHOP IN BARCELONA - 27TH OF NOVEMBER 2014

The last 27th of November, a presentation of ADNATUR project was done. CETAQUA organised a Networking event in which it was presented on-going environmental projects. 

ADNATUR AT SIXTH EDITION OF STUDY DAYS : RESEACH AND APPLICATION OF ECOTOXICOLOGICAL METHODS IN ACQUATIC ENVIRONMENT AND CONTAMINATED MATRICES. LIVORNO 11-13 NOVEMBER 2014

 ADNATUR IN POLLUTEC FAIR - LYON 2-5 December 2014 

Pollutec is the largest international exhibition of enviornmental and energy equipments technologies and services. Within this fair, Green Days representes a good opportunity to boost international contacts and technical/commercial partnership and agreements. This events was organised by Chamber of Commerce and Industry of Rhone-Alpes whithin Enterprise Europe Network and was supported by European Commission

ADNATUR IN ECOMONDO FAIR - RIMINI 2-6 November 2014

ENEA disseminated project activities during 19th International trade fair of material and energy recovery and sustainable development 

WORKSHOP IN AIJU - 19th of November

Next Wednesday, 19th of November, AITEX will participate in a practical workshop of LIFE+ call and other environmental call, focused to show the benefits that could obtain the companies from manufacturing sector (children’s articles, textile, footwear and furniture) through the environmental solutions set-up. This workshop, will take place in the AIJU Research Institute’s headquarters and will have as main objective to present the action lines in which the institutes are working on at environmental level co-financed by the EC through LIFE+ call and other environmental call. 

The event will finish with a practical session in which it will be taken into account the needs of the companies in environmental issues in order to adjust to the novelties, legislation and other requirements.

For more information and inscription to the website: 

http://formacion.aiju.info/AdaptingCampus/usuario/ofertacursos/curso.asp?IdCurso=3079&Estado=

 Descargar agenda

ADNATUR IN H2O FAIR

LIFE Beneficiary 3rd PROJECT MEETING 

Project partners will meet for the 3rd project meeting during H2O " XII International Exhibition of technologies for the treatment and distribution of drinking water and wastewater treatment" from 22 to 24 of October in Bologna

ADNATUR in CERSAIE

ADNATUR in IFAT Fair

ADNATUR in EFIAQUA and "Energy Eficiency & Climate Change" Event

ADNATUR in the ETP (European Textile Platform)

 ADNATUR in ECOFIRA

Kick-off Meeting Celebrated in AITEX Facilities the 23rd of October, 2013

On the 23rd of October, AITEX, SERVYECO, ENEA, KERABEN, TEXTILS MORA and EGEVASA launched the ADNATUR project funded under the LIFE+ programme. The principal aim of the project is to validation, assessment and industrial demonstration of a new innovative and environmentally friendly technology, based on natural products, in primary treatment of wastewaters, at urban and industrial level.

The project will be focused to water, ceramic and textile sectors and has a duration of 36 months

LIFE Beneficiary Kick-off Meeting in Madrid the 8th of October, 2013

The coordinator attended last 8th of October the "Coordinators day" in Madrid. Guidelines for the administrative and financial management of the project were offered.